You can build your own home solar panels

With the advances in solar technology, home solar power systems are becoming increasingly popular, in which to build your solar panels is a very important step for a solar power system, solar panel is a face.

Build a home solar panel following a few essential steps:

Step 1: Preparation of

Step 2: Create a solar panel house

Step 3: Add a solar cell together

Step 4: Position and fixed solar

Step 5: stamped seal your solar panels

The first thing you need to do is to collect all the material together, once you collect all the material, you can start building your solar panels.

Solar panels are a simple frame house, solar cells will hold. The bottom of the box with plywood and the sides are made of 3/4 "× 3/4" wood. Top box will plexiglass cover glass. If using a 3 "× 6" solar cell, splint will need to be cut in size to about 44 "× 21". This would fit two daughter boards 18 of each solar cell. 3/4 "wood should be cut to size, and add to the plywood with screws to create a border for the panel.

At this point, can be cut non-conductive backing and acrylic glass sizes as well. You should also paint the solar panel enclosure and UV protective backing material. Added to the cells together some of the most challenging project, but once you've done a few times, you'll see it is very easy to do.

To get started with this step, you should be solar cells in a non-conductive support, the front end down. Then, you can use a soldering iron, solder, rosin flux pen, and tabbing lines joining each row of cells connected in series.

Once all of the cells in each row are connected together, it is a time for each row into a non-conductive adhesive backing. This is the use of silicone gums. Terminal block before each line should stick to each other in the backing.

Once all the rows are fixed to the non-conductive backing, can be used to connect together the copper line. As with the cell, these lines should also be joining the series.

Front cover and seal the panel, you should test your panel with a voltage meter, and make sure everything is secure.

Once you have completed your test, you are ready to cover the solar panels of plexiglass enclosure, glass and seal it provides weather proofing.

As you can see, it is not so complicated to build your own solar panels. But you'll save time and money using proven methods. One of the most expensive components of DIY solar panels are solar cells. By using less expensive solar cell, can significantly reduce the cost of the panel.

Looking for cheap solar cells is the easiest place on e-bay. You may also be able to with your town highway department for damaged cells, the light from the roadside or local solar installation company checked and found a discount or free solar cells. But the best method of reducing the cost of their own so that a solar cell panel in accordance with a detailed guide. You can use, to successfully build your own solar panels on this page, but it takes some trial and error, to spend your time and money.